| PRODUCT
NAME |
DESCRIPTION |
VISCOSITY |
APPLICATIONS |
AV-100
CHEMICAL GROUT (Gel)
AV-101 Catalyst T+
AV-102 Catalyst AP
AV-105 Ethylene Glycol
AV-257 Icoset |
White
granular powder, water soluble mixture; gel times from 5 seconds to
several hours with variety of additives. Also, available as a liquid.
Uses AV-101 and AV-102 Catalysts. Non-flammable. |
1
to 2 CPS
in
solution |
Typically
used with CCTV equipment. Excellent for sewer joint sealing, service
lateral connections, soil stabilization, contamination containment,
manhole waterproofing. Effective in heavy water flows. Wide range of
controllable gel times. |
AV-118
DURIFLEX (Gel)
AV-101 Catalyst T+
AV-103 Catalyst SP |
Low-toxicity
water solution of acrylic resins. Gel times from 5 seconds to several
hours even in flowing water. May be used with various additives. Uses
AV-101 and AV-103 Catalysts. Non-flammable. |
1
to 2 CPS
in
solution |
Typically
used with CCTV equipment for sewer joint sealing, service lateral
connections, soil stabilization, manhole grouting. Wide range of
controllable gel times. |
AV-202
MULTIGROUT (Foam or Gel)
AV-208 Acetone
AV-202 Cartridges |
Dark
brown liquid prepolymer which reacts freely with water in multiple
proportion to form a strong film, foam, or gel. Ideal for complex
grouting situations. Non-flammable. |
2500
CPS
to
15-30 CPS
in
solution |
Ideal
for sealing precast concrete joints, pipe penetrations, larger cracks in
concrete structures, and large diameter pipe joints in conjunction with
oil-free oakum. Very effective in heavy water flow situations. |
AV-220
HYDRACURE
INJECTION RESIN (Foam)
AV-221 Accelerator
AV-222 Cleaner
AV-220 Cartridges |
Amber
color, water activated prepolymer forms a flexible foam grout with
excellent bonding capabilities. AV-221 Accelerator can be used to
control set time. |
300-400
CPS |
Low
viscosity injection resin for sealing water leaks in small to moderate
width concrete cracks. Excellent adhesion properties to concrete. Use
with Variable Pressure Application Technique (V-PAT) or EGP Technique. |
AV-248
FLEXSEAL (Foam)
AV-249 Flexseal AC |
Pale
yellow, liquid resin polyurethane that reacts in contact with water to
form a hydrophobic foam. Resultant foam is resistant to most organic
solvents, mild acids, and micro-organisms. AV-249 Flexseal AC must be
added to the resin prior to use. Non-flammable. |
650
CPS |
Expansive
foam used to fill voids, seal annular spaces between slipliner and host
pipe, or sealing structures that may be susceptible to extreme wet/dry
cycles. |
AV-254
GELSEAL (Gel)
AV-255 Accelerator G
AV-256 Accelerator W |
Amber,
non-flammable prepolymer intended for 8:1 CCTV urethane sealing. Forms a
strong gel at ratios from 6:1 to 10:1. Nonflammable. Viscosity at 340
CPS is much lower than other available urethane gels. |
10
CPS
in
solution |
Effective
water barrier for sealing around manholes, lift stations, utility
vaults, tunnels, sewer joints, and service lateral connections. |
| AV-262
SURE SEAL (Foam) |
Clear
MDI-based, non-flammable liquid resin polyurethane that reacts in
contact with water. Resultant foam is tough and flexible. |
900
CPS |
Resilient,
flexible foam for sealing infiltration into confined spaces and moving
cracks in concrete. |
AV-280
HYDROFOAM (Foam)
AV-281 Hydrocel |
Dark
brown liquid resin polyurethane which reacts in contact with water to
form a flexible foam. AV-281 Hydrocel must be added to the resin prior
to use. |
500
CPS |
Extremely
expansive semi-rigid foam used to fill voids, seal annular spaces
between slipliner and host pipe, or sealing structures that may be
susceptible to extreme wet/dry cycles. |
| AV-310
HYDRO SEALANT (Foam) |
Pale
yellow, solvent-free hydrophilic resin that reacts with water to form a
highly flexible and adhesive, closed-cell polyurethane foam.
Non-flammable. |
650-800
CPS |
Rapid
curing injection resin which forms a flexible foam seal in the presence
of an equal amount of water. NYCTA approved for use in subway tunnels. |
AV-350
MULTI GEL
(Foam) |
Green
liquid resin 600 to 1200 CPS prepolymer. Reacts with 6 to 10 parts water
to form stiff gel. Reaction time controllable from 5 seconds to 1
minute. |
10
CPS
in
solution |
Effective
water barrier for sealing around manholes, lift stations, tunnels, sewer
joints, and service lateral connections. |
SCOTCH-SEAL
CHEMICAL GROUT 5600 (Foam)
5601 Accelerator
5602 Cleaner |
Light
brown liquid prepolymer; reacts with water to form stiff rubber-like
solid. Premix appearance like 40 wt. oil. Used with 5601 Accelerator,
5602 Cleaner, and AV-208 Acetone solvent. |
350
CPS+ |
NSF
and FDA approved for potable water applications. Low viscosity injection
resin for sealing water leaks in small to moderate width concrete
cracks. Excellent adhesion properties to concrete. Use with Variable
Pressure Application Technique (V-PAT) or EGP Technique. |
SCOTCH-SEAL
CHEMICAL GROUT 5610 (Gel)
5611 Gel Control Agent
5612 Gel Reinforcing Agent |
Blue
liquid resin 600 to 1200 CPS prepolymer. Reacts with 6 to 10 parts water
to form stiff gel. Reaction time controllable from 5 seconds to 1
minute. Gel time and strength influenced by 5611 Gel Control Agent and
5612 Gel Reinforcing Agent added to reaction water. |
10
CPS
in
solution |
NSF
and FDA approved for potable water applications. Effective water barrier
for sealing around manholes, lift stations, tunnels, sewer joints, and
service lateral connections. |
EGP
TECHNIQUE
AV-219 Fibrotite Oakum
AV-215 Resin-Rod |
Use
Fibrotite Oakum or Resin-Rod with either AV-202 Multigrout, Scotch-Seal
5600 (Foam) or AV-220 Hydracure. |
|
Seal
large diameter sewer pipe joints, manhole frames, grade rings, and pipe
to manhole connections. Seals annular space for slipline pipe. |
| ULTRAFINE
CEMENTITIOUS GROUT |
Two
grades of cement grout. Formulated complete with superplasticizer for a
fool proof system with zero bleed and very high compressive strengths.
Particle sizes are 90% <5 microns avg. 2.5 microns and 90% <8
microns avg. 4 microns. |
|
Used
to stabilize weak soils, seal seepage in mines, dams and tunnels, and
for hazardous waste containment. |
